TRAINING INDUSTRIAL GEARBOX REPAIR
TRAINING INDUSTRIAL GEARBOX REPAIR
TRAINING PRECISION MEASUREMENT FOR GEARING
TRAINING INDUSTRIAL GEARING
Description
This class will provide the participant with the knowledge needed to properly maintain, service, inspect, select and repair a variety of Industrial gearboxes. The course will be and instructor-led, hands-on class that will allow the participant to physically take apart various industrial gearboxes and learn to properly “set” the gears and how to properly “preload” the bearings for maximum life expectancy. There will be a workbook, handouts and various visual aids used in the classroom to facilitate learning.
Outline
• Introduction to Gears
• A Brief History of Gearing
• Terminology of Gearing
• Precision Measurement for Gearing
• Selection of the Correct Type of Gearbox
• Spur Gear Drives
• Helical Gear Drives
• Double Helical Gear Drives
• Herring Bone Gear Drives
• Hypoid Gearing
• Worm Gear Drives
• Cone Drives
• Cycloidal Drives
• Cam Drives
• Variable Speed Drives
• Gear Set Up
• Bearings
• Lubrication
• Seals
Prerequisites
There are no prerequisites other than an interest in Industrial gearing and a willingness to participate in a “hands-on” classroom environment.
Course Length
4 days
Performance Objectives
At the completion of this course the participant will be able to:
– Properly “setup” an industrial gear drive.
– Understand the selection procedures used to select the correct industrial gearbox.
– Troubleshoot industrial gearboxes using failure analysis.
– Select the correct lubrication to ensure maximum life expectancy.
– Correctly remove and replace bearings, seals and gears.
Instructor
Dr. Ir. Jamasri
OBJECTIVE
Peserta mengetahui macam macam mesin pembakaran dalam & macam macam generator listrik.
Peserta mengetahui klasifikasi mesin diesel dan generator listrik.
Peserta mampu melakukan pelacakan gangguan dan melakukan perbaikan pada mesin diesel dan generator listrik.
Peserta mampu melakukan instalasi, pengujian dan pencegahan gangguan pada genset.
Peserta mampu melakukan pemeliharaan dan perawatan pada genset.
MATERI PELATIHAN GENERATOR SET
a. Engine Review
Klasifikasi dan prinsip kerja mesin pembakaran dalam ( dua langkah dan empat langkah). Pengukuran pada mesin diesel (Efficiency, Torque, Speed & Power), komponen komponen mesin diesel dan fungsinya.
b. Sistem Pembakaran
Sistem pembakaran pada mesin diesel
Perhitungan kebutuhan udara teoritis (AFR)
c. Trouble Shooting & Maintenance Diesel Engine
Kurva kinerja mesin diesel dan sistem kontrol, inspection, tuning dengan menggunakan engine analyzer, adjustment inspection, maintenance & repair, troubleshooting analysis.
d. Macam macam Generator Listrik
Generator AC
Generator DC
e. Klasifikasi Generator Listrik
Spesifikasi, rating temperatur, isolasi, tipe operasi, pemanasan & pendinginan, kelas perlindungan (International Protection)
f. Pembebanan
Beban konstan, beban berubah
Mengontrol kecepatan
Pelacakan gangguan dan perbaikan
g. Pemilihan Generator
Cara menentukan spesifikasi mekanik
Cara menentukan spesifikasi Elektrik
Perincian yang diperlukan dalam pemilihan generator listrik
h. Instalasi dan Pengujian untuk mencegah gangguan
Instalasi
Pengawatan dan pentanahan
Cara operasi untuk pencegahan gangguan
Jadwal TMI Consultant 2025
Batch 1 : 15 – 16 Januari 2025
Batch 2 : 12 – 13 Februari 2025
Batch 3 : 19 – 20 Maret 2025
Batch 4 : 16 – 17 April 2025
Batch 5 : 14 – 15 Mei 2025
Batch 6 : 11 – 12 Juni 2025
Batch 7 : 9 – 10 Juli 2025
Batch 8 : 13 – 14 Agustus 2025
Batch 9 : 17 – 18 September 2025
Batch 10 : 15 – 16 Oktober 2025
Batch 11 : 12 – 13 November 2025
Batch 12 : 10 – 11 Desember 2025
Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.
Biaya dan Lokasi Pelatihan :
- Jakarta: Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget | Biaya Pelatihan : Rp. 7.500.000 / peserta(Minimal 2 Peserta).
- Bandung: Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel | Biaya Pelatihan : Rp. Rp. 7.000.000 / peserta(Minimal 2 Peserta).
- Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel | Biaya Pelatihan : Rp. 6.500.000 / peserta(Minimal 2 Peserta).
- Surabaya: Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel | Biaya Pelatihan : Rp. 6.800.000 / peserta (Minimal 2 Peserta).
- Malang : Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel | Biaya Pelatihan : Rp. 6.800.000 / peserta (Minimal 2 Peserta).
- Bali: Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions | Biaya Pelatihan : Rp. 6.500.000 / peserta (Minimal 3 Peserta).
- Lombok: Favehotel, Novotel Lombok, D Praya Hotel | Biaya Pelatihan : Rp. 7.000.000 / peserta (Minimal 3 Peserta).
Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor CS kami.
Fasilitas Pelatihan di TMI Consultant:
- Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
- Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
- Transportasi Peserta ke tempat pelatihan.
- 2x Coffe Break & 1 Lunch (Makan Siang).
- Training Room Full AC and Multimedia.
- Free Bag or Bagpackers (Tas Training).
- Softfile Foto Training
- Sertifikat Pelatihan.
- Souvenir Exclusive.