TRAINING CHILLER AND COOLING TOWER

TRAINING CHILLER AND COOLING TOWER

TRAINING CONTROL VALVE BASICS

TRAINING CHILLER AND COOLING TOWER SYSTEM

training Control Valve Basics murah

INTRODUCTION:

Chiller and cooling tower are used in HVAC, power plant and refrigeration system. Design and operation of the equipments are very important to know for an engineer. This course covers the fundamentals and practical applications for understanding of design and operation of the chiller and cooling tower. The comprehensive coverage of the basic theory, system analysis, optimization concept, and calculation methods to make this the most complete course available today in achieving an economical system.

TRAINING BENEFITS:

Enable to analyze and recommend the most effective solution available in operation and design for chiller and cooling tower. Enable to utilize energy as possible as saving for chiller and cooling tower system. Familiar and better understanding of all aspects relating to efficient chiller and cooling tower in commercial application.

WHO SHOULD ATTEND THIS TRAINING?:

Technicians
ME engineers
and other who responsible for selecting, mechanical equipments
MATERIAL OUTLINE  CHILLER AND COOLING TOWER:

Chiller System and Basics
Work Principle of Chiller
Piping Basics
Pumping Basics
Control Valve Basics
Loop Control Basics
Air-Cooled Chillers
Water-Cooled Chillers
Piping and Diversity
Chiller Construction and Safety
Dual Compressor Chillers
VFD Chillers
System Design Changes
Mechanical Room Safety Standard
Single Chiller System
Basic Operation and Arrangement of Chiller
Basic Components
Series Chillers System
Single Chiller Sequence of Operation
Parallel Chiller System
Parallel Chiller Sequence of Operation
Series Counterflow Chillers
Using VFD Chillers in Series Arrangements
System Comparison
Very Large Chiller Plants
Primary/Secondary Sequence of Operation
Chiller Cooling System
Water-Side Free Cooling
Direct Waterside Free Cooling
Parallel Waterside Free Cooling
Series Waterside Free Cooling
Waterside Free Cooling Design Approach
Waterside Free Cooling Sequence of Operation
Chilled Water Volume
Chilled Water Temperatures and Ranges
Minimum Chilled Water Volume
Estimating System Volume
Evaluating System Volume
Cooling Tower
Cooling Tower Types and Cooling Tower Systems
General Design Consideration
Cooling Tower Construction and Installation Requirements
Tower materials
Cooling Tower Design and Operation Consideration
Cooling Tower Water and Bleed-off Water Control
Improving Energy Efficiency of Cooling Towers
Hybrid Plants and Energy Saving
Heat Recovery and Templifiers
Load Profiles
Heat Recovery Chillers
Variable Primary Flow Design
Variable Primary Flow Sequence of Operation
Low Delta T Syndrome
Low Delta T Example
Low Delta T Syndrome Causes and Solutions

INSTRUCTOR :

DR. Ir. I Made Astina, M.Eng.  and Team

Jadwal TMI Consultant 2025

Batch 1 : 15 – 16 Januari 2025

Batch 2 : 12 – 13 Februari 2025

Batch 3 : 19 – 20 Maret 2025

Batch 4 : 16 – 17 April 2025

Batch 5 : 14 – 15 Mei 2025

Batch 6 : 11 – 12 Juni 2025

Batch 7 : 9 – 10 Juli 2025

Batch 8 : 13 – 14 Agustus 2025

Batch 9 : 17 – 18 September 2025

Batch 10 : 15 – 16 Oktober 2025

Batch 11 : 12 – 13 November 2025

Batch 12 : 10 – 11 Desember 2025

Catatan : Jadwal dapat menyesuaikan dengan kebutuhan anda.

Biaya dan Lokasi Pelatihan :

  • Jakarta: Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget | Biaya Pelatihan : Rp. 7.500.000 / peserta(Minimal 2 Peserta).
  • Bandung: Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel | Biaya Pelatihan : Rp. Rp. 7.000.000 / peserta(Minimal 2 Peserta).
  • Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel | Biaya Pelatihan : Rp. 6.500.000 / peserta(Minimal 2 Peserta).
  • Surabaya: Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel | Biaya Pelatihan : Rp. 6.800.000 / peserta (Minimal 2 Peserta).
  • Malang : Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel | Biaya Pelatihan : Rp. 6.800.000 / peserta (Minimal 2 Peserta).
  • Bali: Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions | Biaya Pelatihan : Rp. 6.500.000 / peserta (Minimal 3 Peserta).
  • Lombok: Favehotel, Novotel Lombok, D Praya Hotel | Biaya Pelatihan : Rp. 7.000.000 / peserta (Minimal 3 Peserta).

Catatan : Biaya diatas belum termasuk akomodasi/penginapan. Apabila ada pertayaan mengenai materi, biaya, lokasi, jadwal dan penawaran lainnya, hubungi kami di nomor CS kami.

Fasilitas Pelatihan di TMI Consultant:

  1. Penjemputan dari Hotel/Bandara/Stasiun/Terminal.
  2. Training Kit (Dokumentasi photo, Blocknote, ATK, Flashdisk, dll).
  3. Transportasi Peserta ke tempat pelatihan.
  4. 2x Coffe Break & 1 Lunch (Makan Siang).
  5. Training Room Full AC and Multimedia.
  6. Free Bag or Bagpackers (Tas Training).
  7. Softfile Foto Training
  8. Sertifikat Pelatihan.
  9. Souvenir Exclusive.